Hercules Propoxy20 - Fast & Easy Repair Putty - Made in The USA

Propoxy20 is a fast acting, co-extruded single stick, epoxy putty. Made of a pre-measured, steel reinforced black epoxy resin with a contrasting strip of hardener embedded in the centre. The two part epoxy compound mixes quickly and easily to form a permanent steel-hard bond in 20 minutes. Adheres to almost any surface with strength often greater than the materials it has joined. After curing, it can be drilled, filed, sanded, painted and machined. Can be applied to damp or wet surfaces and even make underwater repairs. Propoxy20 is non-conductive and may be used on applications where it is subject to temperatures up to 149°C for extended periods of time. Directions of use: For best results, surfaces should be cleaned of grease and dirt. Smooth surfaces should be roughened by filing or sanding before application. Propoxy20 will start to cure (harden) after 10 minutes in its mixed state. For best results, try to have repair in place before hardening starts. 1. Remove protective film and cut or twist off a section of Propoxy20 2. Roll and knead putty between hands, until streaks disappear and color is uniform grey. 3. Apply to clean surface. Forcibly work the product into any cracks or holes to be filled. To have a very smooth surface, gently rub Propoxy20 with a wet finger or damp cloth immediately after application. Shape and remove excess material before product hardens. Putty will be steel hard in 20 minutes at room temperatures. 4. For underwater applications, wrap sealed connection with waterproof tape. Wait 12 hours before removing tape. Do not use in fish tanks as product may be toxic for fish. 5. Propoxy20 may be painted immediately after application. Wait one hour before using water-based paint. If it necessary to drill, file, tap, sand or machine Propoxy20 be sure that the product has fully hardened for best results.

• Propoxy20 is an extraordinary compound used in countless situations! Seals, mends, bonds and repairs almost anything in plumbing, heating, industrial maintenance and home applications.
• Seals and adheres to most surfaces: metals, masonry, wood, glass, ceramics and some plastics.
• Tough as steel.
• Waterproof, Non-conductive, ly resistant.
• Ideal for all sorts of repairs and DIY.