Click Here

good product

Fire place blower

Very easy to mount with the magnet . If turns on shortly after my natural gas fireplace inert light up but takes a very long time to turn off after the stove shuts off. When it does shut off I can put my hand on the stove and it is just warm but not at all hot.

I like it works great used for a refrigerator with a four inch fan for cooling of compressor great idea if I do say so myself

Worked perfectly! Nice to load the stove at night and have the blowers not blowing cold air in the morning.

Once installed, my blower would cycle on periodically but then would quickly turn off. Upon closer inspection I realized that the design created problems with thermal conduction. The rivets create an air gap between the firebox and the metal plate that the sensor rests on. Once heat radiates across the air gap it needs to conduct through the metal plate to reach the sensor. If the sensor isn't tight against the metal plate there is another air gap. I modified the sensor mount and now the switch works well. I drilled out the rivets, drilled a hole through the plate, and mounted the sensor on the opposite side of the plate so that the surface will have direct contact with the wall of the firebox. This is a design weakness that the manufacturer could have easily overcome.

Replaced old one from a different brand and fit like a glove

Old one failed and unhooked 2 wires then re hook and im back in business. Perfect